page_head_gb

huahana

PP SP179 Injection molding grade-Impact copolymer

wehewehe pōkole:

Inoa mea kūʻai:Polypropylene Resin

inoa ʻē aʻe:Kiʻekiʻe Density Polyethylene Resin

ʻAno:ʻO ka pauka keʻokeʻo/Granule Transparent

Papa helu- kiʻiʻoniʻoni, hoʻoheheʻe ʻia, extrusion molding, injection molding, pipes, wire & cable and base material.

HS Code:39012000


Huahana Huahana

Huahana Huahana

ʻO ka resin polypropylene kekahi o kā mākou huahana nui, ʻo ka polypropylene resin kahi polymer crystalline.ʻO nā huahana granule cylindrical, ʻaʻohe mea haumia mechanical.ʻO ka haʻahaʻa haʻahaʻa pili o ka huahana (0.90g/cm3-0.91g/cm3) e hana i ka huahana noi i ke aniani maikaʻi a me ka ʻālohilohi o ka ʻili, a loaʻa ka insulation uila maikaʻi a me ke kūpaʻa kemika.ʻO ka hoʻohui ʻana i nā mea hoʻohui kemika hiki ke hoʻomaikaʻi maikaʻi i ka hana huahana a hiki ke hoʻopili ʻia i nā māla huahana hou aʻe.Hiki ke hoʻohana nui ʻia ka Polypropylene i ka hoʻoheheʻe ʻana, ka hoʻoheheʻe ʻana, ka extrusion, ka uhi ʻana, ke kaula a me ka uea sheath, extrusion monofilaments, narrow band, film, fiber, etc., ma nā ʻano like ʻole o ka ʻoihana, ka mahiʻai a me nā mea e pono ai i kēlā me kēia lā.

ʻO SP179 kahi mea kūikawā no ka bumper kaʻa.Hōʻike ʻia nā huahana i hana ʻia mai kēia resin e ka hana wikiwiki a me ka hana maikaʻi loa.

ʻO Virgin PP Granules SP179

'ikamu Unite Ka hopena hoao
Kahe Kahe (MFR) g/10 min

8.0-12.0

ʻO ka ikaika o ka tensile yield Mpa ≥18.0
Maʻemaʻe, kala pakahi / kg ≤15
Pākuʻi hoʻololi MPa ≥700
Notched Izodimpact ikaika -20℃, KJ/m2  
Modulus Flexural MPa 950

Palapala noi

Hoʻohana nui ʻia ka copolymer hopena PP i ka hana ʻana i nā huahana ʻoihana, e like me ka dashboard, nā mea hoʻonaninani kūloko, nā bumper kaʻa.Hiki ke hoʻohana ʻia no ka hana ʻana i nā ʻatikala hale, e like me nā pāpale omole, nā mea kuke, nā lako, nā mea pāʻani, nā mea hana, nā pahu huakaʻi, nā ʻeke a me nā pahu pahu like ʻole.

PP-SP179-Injection-molding-grade-Impact-copolymer-2
PP-SP179-Injection-molding-grade-Impact-copolymer-3
PP-SP179-Injection-molding-grade-Impact-copolymer-1

Hoʻopili a me ka lawe ʻana

Hoʻopili ʻia ka resin i loko o nā ʻeke ulana polypropylene i uhi ʻia i loko a i ʻole nā ​​ʻeke kiʻiʻoniʻoni FFS.ʻO ka paona ʻupena he 25Kg / ʻeke.Pono e mālama ʻia ka resin i loko o kahi waihona maloʻo a maloʻo a mamao i ke ahi a me ka lā pololei.ʻAʻole pono e hoʻahu ʻia ma ka lewa ākea.I ka wā o ka halihali ʻana, ʻaʻole pono e ʻike ʻia ka mea i ka lā ikaika a i ʻole ka ua a ʻaʻole pono e lawe pū ʻia me ke one, lepo, metala ʻōpala, lanahu a aniani paha.ʻAʻole loa e pāpā ʻia ka lawe ʻana me nā mea ʻawaʻawa, corrosive a me ke ahi.

PP SP179 Injection molding grade-Impact copolymer (3)
PP SP179 Injection molding grade-Impact copolymer (2)

  • Mua:
  • Aʻe: